Want to replace the toner in your Brother DCP7065DN but don’t know how to do so? If, yes then follow the given steps. Actually, “Replace Toner” or “Toner Life End” message has not automatically reset if you have replaced the toner in your Brother or getting the technical issue.
Steps of Brother DCP7065DN Toner Reset are as follows:-
Step-1: Remove the drum and toner open the front door as well as the cover to avoid light damage.
Step-2: Confirm that the display shows cover open.
Step-3: To confirm that the display shows replace drum press the clear key
Step-4: Confirm that the display is clear after pressing the clear key
Step-5: Now quickly press the up arrow key as well as confirm the display shows 00.
Step-6: Confirm that the display shows accepted after pressing the OK key which is followed by a cover open message.
Step-7: Close the front door, after installing the drum and toner assembly, and the display should appearance message “please wait”.
Step-8: Error message should be gone when the printer has warmed up and you should see the standard display.
Step-9: This process has been verified on the DCP-7065DN, still may also work on other DCP models which take the TN2250 / TN2230 /TN450 toner.
For more details get Brother Printer Customer Service users have confirmed that the procedure works on HL-2280DW, DCP-7040, DCP-7055 / HL2280DW/ DCP7040/DCP7055.
In addition, contact Brother Printer Support Phone Number if your problem remains unchanged.